Matsui Discharge & 301 ECO-Series PRO COLOR STARTER KIT

Matsui DISCHARGE & 301 ECO-Series Textile Ink “PRO COLOR STARTER KIT”

Contents:

• 1 x 9 lbs.BRITE Discharge BASE
• 1 x 11 lbs. BRITE Discharge "Super" WHITE
• 1 x 9 lbs. 301-C Clear BASE ECO-Series Textile Ink
• 1 x 9 lbs. 301-M Mat Semi-Opaque BASE ECO-Series
• 1 x 9 lbs. 301-W OPAQUE White ECO-Series Textile
• 13 x 16 oz. NEO Pigment (all 14 colors for PMS matching)
• 1 x 16 oz. Discharge AGENT
• 1 x 16 oz. PrintGen MG Slow Drying Additive
• 1 x 32oz. DZ-343 "or" WR Water Resistant Direct Emulsion (pre-sensitized) *NEW*
• 10 each Yellow Plastic Spreader/Spatula
• 4 Empty Plastic Mixing Jars with Lids

This “Professional” kit will get you’re shop started with ECO-FRIENDLY water based printing for textiles.  Everything for PMS color mixing/matching and enough Bases & Opaque White to print hundreds of shirts  It allows you to mix any color needed to print on 100% Cotton, 100% Polyester & 50/50 tees.  Enough agent is included for both Discharge inks at the correct ratio, stir well and print through 110 mesh.  

Use an accurate gram scale to mix color pigments and add to the Brite Discharge Base or either ECO-Series Bases to see the dramatic intense colors from a one pass print!  Free color matching software is included.  Consult ECO-Series spec sheet for additional information and drying times.* Use PrintGen MG sparingly to keep ink loose and easily printable.

NEW - This kit now includes WR Water Resistant Direct Emulsion.  A pure photopolymer, high resolution, fast exposing, high solids, presensitized emulsion that is all "ready to go".  Now you will have the correct emulsion for use with all water based inks (works great for plastisol inks too!). 

The purpose of these kits is to help printers establish an economical way to "start-up" testing or begin using and have all necessary components.  Because of these super low "introductory prices" we must limit sales to: ONE KIT PER CUSTOMER