Your Shopping cart is empty.

We have what you need to succeed!

Skip to Main Content »

ATTENTION:

Charles M Jessup Inc / Screen & Digital Supply

HAS PERMANENTLY CLOSED

Thank you to all of our customers over the last 75 years

Please email with any questions or comments: [email protected]

International Coatings 7014 Legacy WHITE Fast Fuse Low Bleed

International Coatings 714 LF LB FF White Direct Print Plastisol

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • International Coatings 714 LF LB FF White Direct Print Plastisol

Details

International Coatings 7014 LF LB FF White

Direct Print Plastisol, LOW BLEED

This white has been overwhelmingly accepted by many printers.  Creamy, easy to print manual OR on the automatic.  Customers say it works "better" than the 711 White, which cost  20% more!  Super low curing temp, makes this a great underbase white that will flash super fast.

Make this your "GO TO WHITE" !!

FEATURES

7014 Legacy White is a low bleed, high pigment, fast flashing, low tack, non- phthalate plastisol screen printing ink.

7014 Legacy White™ has a creamy viscosity and medium body, making the ink suitable for both auto and manual processes.

7014 Legacy White™ offers superior performance through fast production speeds, and its brightness and opacity.

SPOT FLASHING

7014 Legacy White™ will spot dry, with a very low after flash tack. Dwell time is dependent on the spot dryer used. In some cases, you may have to lower the heat of the spot cure unit because too much heat may actually make the ink tacky. When you spot dry, you are only partially fusing or gelling the surface of the ink. The ink should just dry to the touch, with no lift o , but not totally fused. Totally fusing the underprint white may cause inter-coat adhesion problems with the inks printed on top of the white ink. Final fusing or curing occur in the dryer. 

IMPORTANT INFORMATION

7014 Legacy White™ is a low bleed ink, not a non-bleed ink. On some types of fabric, bleeding or dye migration may occur. Always test print the fabric to be printed before beginning production. It is best to do some long term testing on fabrics to determine if they are going to bleed. Bleeding or dye migration may not occur right away.

7014 Legacy White™ was formulated to make printing opaque white easy. Hand printing is less tiring because less squeegee pressure is needed. The result is improved operator performance. Automatic equipment can be adjusted to lower pressure settings, thus improving screen life, squeegee durability and overall print quality.

7014 Legacy White™, compared to other opaque whites, prints easil ou will nd that a ner screen mesh can be used the same opacity as a more open mesh. This means less ink will be , a real money saver in terms of ink usage. It also means a softer hand on ashed fabrics. 

Adding any reducers or additives can lower bleed resistance, reduce opacity, or increase cure times of the ink. STIR the ink prior to printing on press and after addition of reducers or additives.

Test dryer temperatures and wash test printed product before and during a production run. 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.