Your Shopping cart is empty.

We have what you need to succeed!

Skip to Main Content »

ATTENTION:

Charles M Jessup Inc / Screen & Digital Supply

HAS PERMANENTLY CLOSED

Thank you to all of our customers over the last 75 years

Please email with any questions or comments: [email protected]

IJP Brother GT Series Print Head Flush Kit

IJP Brother GT Series Print Head Flush Kit

Be the first to review this product

Availability: In stock

$35.95
  • Buy 2 for $32.36 each and save 10%
OR

Quick Overview

DTG Print Head Flush Kit


This kit is primarily intended for Brother GT-541/782 Series printheads.  Use this kit for attempting “field recovery” of clogged printheads.  This kit is for intensive flushing of printhead in an attempt to clear clogged nozzles and should be used as a ‘last ditch effort’ prior to replacing the printhead.

IJP Head Wash/Flush Kit

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • IJP Head Wash/Flush Kit
  • GT-541 Printhead Flushing

Details

Brother GT-Series & DTG Print Head Flush Kit

(See also our HEAD AND DRAIN Flushing Kit. Great Value)

This kit is primarily intended for Brother GT-541 & GT-782 Series printheads, but can be used on other brands as well as GT-3 Series Printheads.  (SEE DISCLAIMER NOTE) Use this kit for attempting “field recovery” of clogged printheads.  This kit is for intensive flushing of printhead in an attempt to clear clogged nozzles and should be used as a ‘last ditch effort’ prior to replacing the printhead.  Use on ‘out of warranty’ heads only.  

SUGGESTED DIRECTIONS:

Brother recommends the use of the Disc Filter to prevent injecting foreign particles into the Printhead.  If only our "Triple-Filtered Juice" is used out of the container, there is no need to use the syringe disc filter.  Use extreme care not to spill solution or wet ink onto printhead electronics boards or connections.  Do not inject un-filtered air or juice into head.  Take note of flow direction on disc micro-filter.

  1. Remove printhead and place on top of support/discharge waste cup so nozzles are free from obstruction.
  2. Draw 12cc of air into syringe, affix disc filter and hose and expel air into ink reservoir thru ink feed nipple.
  3. Remove filter and fill syringe with 12cc of Filtered Wash ‘Juice’, replace filter and hose and inject ‘juice’ into printhead under slight pressure.
  4. Repeat process alternating air injection and juice injection until head seems clear.
  5. Empy an discard used fluid from the Waste Cup as needed.
  6. FILL Waste Cup with clean 'Juice' and place Printhead on top.
  7. Inject 5cc's of 'Juice' into head and let stand for 1-24 hours.
  8. Inject an additional 2-5cc's of clean 'Juice' and inject while using a "toilet-Plunger" in/out action to break apart any remaining residue.
  9. Finalize by injecting air only several times until only clean foam is seen being expelled from nozzles.
  10. Replace head and re-introduce ink. 

 

CONTENTS:

  • 1 ea: 118 cc Triple-Filtered Wash "Juice"
  • 1 ea: 30cc Plunger Syringe
  • 1 ea: Micro-Filter Disc
  • 1 ea: Blunt Needle Tip
  • 1 ea: 5” Tight-Fit Silicone Tubing
  • 5 ea: Cleanroom Foam Swabs
  • 1 ea: Stand/Discharge Cup

 

DISCLAIMER:  InkJetPrintables service kits are intended for use by trained, authorized or certified technicians.  Although brief instructions are included, we can not freely supply end-users with specific technical support in the use of these kits.  We can not be responsible to troubleshoot a user's machine to determine the reason for print quality issues.  Although we will always try our best to accommodate our customers with support and technical knowledge, please understand we can not offer this free support "on demand".  Your best option is to access Brother's technical support team and when necessary, have a Brother Certified Technician for on-site service.

WARNING:  Print head nozzles are very delicate and sensitive, if any substance other than a specifically formulated solvent is used to clean them, damage to the nozzles and print head is likely to occur.  Many operators are misinformed that they can use 'Simple Green" to clean sensitive and delicate inkjet printheads.  "Simple Green" is intended for janitorial and general cleaning purposes and is NOT FILTERED and may contain particulate that will damage or permanently clog printhead nozzles.  We recommend to USE ONLY our *Triple Filtered* Inkjet Cleaning Solution "Juice".  It is specialy formulated by us and triple-filtered to guarantee NO FOREIGN specs or contaminates that can damage printheads.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.