International Coatings 220 PUFF Additive
Details
220 PUFF Additive
220 PUFF ADDITIVE
220 Puff Additive is a plastisol product formulated to be mixed with International Coatings standard plastisol inks to produce a raised or puff effect. Can be hand stirred into Multipurpose, 700, 900, 7500 and 7600 Series inks. The recommended maximum ratio of additive to ink is 15% by weight.
220 LF is a Non-Phthalate (NP) Product.
DIRECTIONS:
To add hight (puff), add 1-10% of additive to ink by weight (up to 50:5 ink to additive ratio). To create a much higher puff, add 10% to 30% of additive to ink by weight (10:1 up to 4:1 ratio). The more you add, the higher the puff.
To maximize height: Print, Flash Gel (do not overflash), Print. That will increase height by 100%. Use designs that are not solid large areas, that will cause curling. Minimize curling by printing patterns instead of large solid areas.
NOTE: The more you add, the weaker the color intensity will be. Try to stay below 10%. Another method for increasing height, is to use coarser mesh, such as 60 mesh