The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The Little Red X3-D model is equipped with a 54 in. wide conveyor belt and three 48 in. wide infrared heaters (33,400W @ 240V total wattage) and can cure 720+ plastisol-printed garments/h, 240+ water-based or discharge-printed garments/h, and up to 100+ garments/h inkjet printed with digital white ink.

The X3-D features a powerful 550 cfm targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

Capacity can be increased as needs grow by adding additional heating chambers, extending the belt length and increasing the infinitely-variable speed setting of the digital belt control.

FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL
33,400W@240V total wattage

DEPENDABLE
Industry-leading 15-year heater warranty

FAST

• 720+ garments/hr for plastisol inks
• 240+ garments/hr for water-based or discharge inks
• 100+ garments/hr for DTG digital white ink @ 3 minutes
• 76+ garments/hr for DTG digital white ink @ 4 minutes

EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
"X-Series" Conveyor Belt Tracking System with Teflon coated fiberglass belt

ACCURATE
Digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
2 - 7 in. belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE
Add 24 in. chambers and/or 18 in. belt extensions