Need to call us? 732-324-0430, 800-525-4657, Cust Service email: info@jessupinc.com , Technical Questions: jay@jessupinc.com

IF you experience ANY issue at Check-Out, Please CALL US or EMAIL your order.

** We no longer accept AMERICAN EXPRESS ** 


 

 CLICK HERE for CLEARANCE RACK


 

 

 

International Coatings 3801 LF Plastisol Foil Adhesive

International Coatings 3801 LF Plastisol Foil Adhesive

Be the first to review this product

Availability: In stock

Product Name Price Qty
QUART 3801 LF Plastisol Foil Adhesive
$28.58
GALLON 3801 LF Plastisol Foil Adhesive
$63.50
PAIL 3801 LF Plastisol Foil Adhesive
$272.50
OR

Quick Overview

International Coatings 3801 LF Plastisol Foil Adhesive

3801 LF Plastisol Foil Adhesive

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • 3801 LF Plastisol Foil Adhesive

Details

3801 LF Plastisol Foil Adhesive

FEATURES

3801LF* is a clear plastisol adhesive used to produce brilliant metallic foil designs on textiles. The adhesive can be printed directly onto the fabric and the foil applied to the dried adhesive. + The adhesive can also be printed directly on the foil as a conventional transfer would be printed (mirror image). Designs made with 3801LF adhesive may be applied to light or dark fabrics. *LF (Lead Free) Contains less than 0.025% lead. Application & Storage Information

RECOMMENDED FABRICS 100% Cotton and some cotton/polyester blends.

ADHESIVE APPLICATION The 3801LF Foil Adhesive should be printed right out of the container without any modifications. Stir adhesive prior to use.

SCREEN MESH AND EMULSION 74 to 110 t/in or 30-43 t/cm Monofilament Any direct or indirect lacquer proof emulsion. Use 70 to 80 micron capillary film for best results. Recommend: 86 to 110 t/in or 34-43 t/cm mesh for T-Shirts Recommend: 74 to 86 t/in or 30-34 t/cm mesh for sweatshirts

SQUEEGEE 60-75 Durometer: Sharp or beveled edge

CURE TEMPERATURE For direct printed fabrics: 325°F (163°C) entire ink film. For transfer printing (adhesive on foil): 240°F to 275°F (116°C to 135°C) Test dryer temperatures and wash test printed product before and during a production run..

CLEAN-UP Textile Press Wash

PRODUCT PACKAGING Quart, 1 Gallon or 5 Gallon Containers.

PRODUCT MSDS Refer to material safety data sheet MSDS8.

FOIL APPLICATION Foil is applied colored side up and aluminum looking (dull) side down. Rub foil with eraser immediately after appli- cation to help remove any wrinkles. Allow transfer to cool completely (20 to 30 seconds) after application before removal of foil sheet. Pull foil sheet off slowly. It can be helpful to tint the 3801LF Foil Adhesive, to the color of the foil being applied, with a small amount of con- ventional plastisol. This process will help to keep small pinholes in the applied foil film from being noticeable. As example: Use a few grams of yellow or gold plastisol in the 3801LF Adhesive when using gold foil. Use a few grams of black or gray plastisol in the 3801LF Adhesive when using silver foil.

APPLICATION TEMPERATURE 300°F to 325°F (149°C to 163°C). Try lower temperature first for best results.

APPLICATION TIME 10-15 Seconds APPLICATION PRESSURE T-Shirts = Medium (40lbs.) Sweatshirts = Medium to Heavy (40lbs. to 60lbs) The brightest foil effect will result when the foil is first removed. To achieve a textured matte finish foil, re-seal the garment or hat in the transfer press for 3-4 seconds after the foil carrier film has been removed.

IMPORTANT INFORMATION For best durability of the foil after it is applied, it is recommended that the garment be hand washed or machine washed (delicate cycle) inside out and line or air dried. Do not use bleach. Do not iron printed area.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.