IJP Brother GT Series Drain Tube Flush Kit

Were you told that your Drain Tube #SA6004001 or, Drain Tube #SA6289001 is clogged?

Suggested Use:     Use this kit for clearing clogged drain tubes in the Brother® GT-541 or GT-782 direct to garment inkjet printers.  There is enough solution to clear/flush all 4 drain tubes.  Drain tubes become impacted at the solenoid pinch spot deep inside the Maintenance Station with dried ink residue and lint or dust that is flushed past Caps.  Once this blockage occurs, you are unable to replenish ink into printhead to clear head clogs.   

Machines that are subject to long periods of storage, infrequent use, temperature extremes or high dust/lint garment handling, will at some point suffer from partial, or total blockage of drain tubes.  We have also seen this blockage in frequently used printers that are 3-5 years old.

GT-3 USERS:  Brother GT-3 Series printers may also use this kit.  The printheads and Capping Station are similar configuration. However the Instructions are written with the GT-541/782 in mind.

CONTENTS: 
- 1 bottle  236cc Triple Filtered Wash "Juice" 
- 5 each  Foam Cleaning Swabs 
- 1 each  X-tra Large 60cc Syringe with Luer Lock Tip 
- 1 each  Squirt Cap with Dispenser Tube 
- 1 each  Silicone "Tight Fit" Injection Tube
- 1 pair  Nitrile or Latex Gloves

DISCLAIMER:  InkJetPrintables service kits are intended for use by trained, authorized or certified technicians.  Although brief instructions are included, we can not freely supply end-users with specific technical support in the use of these kits.  We can not be responsible to troubleshoot a user's machine to determine the reason for print quality issues.  Although we will always try our best to accommodate our customers with support and technical knowledge, please understand we can not offer this free support "on demand".  Your best option is to access Brother's technical support team and when necessary, have a certified technician for on-site service.

WARNING:  Print head nozzles are very delicate and sensitive, if any substance other than a specifically formulated solvent is used to clean them, damage to the nozzles and print head is likely to occur.  Many operators are misinformed that they can use 'Simple Green" to clean sensitive and delicate inkjet printheads.  "Simple Green" is intended for janitorial and general cleaning purposes and is NOT FILTERED and may contain particulate that will damage or permanently clog printhead nozzles.  We recommend to USE ONLY our *Triple Filtered* Inkjet Cleaning Solution "Juice".  It is specialy formulated by us and triple-filtered to guarantee NO FOREIGN specs or contaminates that can damage printheads.