IJP Brother GT Series Print Head *AND* Drain Tube Flush Kit

Brother GT-Series & DTG Print Head *AND* Drain Tube Flush Kit

This kit is a combination kit, intended for Brother GT-541 & GT-782 Series printheads and Drain Tubes, but can be used on other brands.  Use this kit for attempting “field recovery” of clogged printheads.  This kit is for intensive flushing of printhead in an attempt to clear clogged nozzles and should be used as a ‘last ditch effort’ prior to replacing the printhead.  Use on ‘out of warranty’ heads only.  

It also has all parts needed to flush Drain Tubes.  When the Drain tube under the capping station is clogged, no head cleaning is possible.  The [rinthead will act as if it is clogged, or out of ink, when in reality the Drain Tube is plugged up.  This is normal for printers that are over 2 years old.  

Brother GT-3 Series printers may also use this kit.  The printheads and Capping Station are similar configuration. However the Instructions are written with the GT-541/782 in mind.  We are not certified in the Technical Repair of GT-3 series printers.

SUGGESTED DIRECTIONS:

Included with kit.  Complete use instructions are included with the kit.  They detail exact proceedure as recommended by InkJetPrintables Technicians as well as Brother Tech Support Sheets.

CONTENTS:

• 1 ea: 118 cc Triple-Filtered Wash "Juice"
• 1 ea: 30cc Plunger Syringe
• 1 ea: Micro-Filter Disc
• 1 ea: Blunt Needle Tip
• 1 ea: 4” Fluoropolymer Ink Tubing
• 1 ea: 4" Tigh-Fit Silicone Tube
• 1 ea: 4" Rigid Squirt Tube
• 5 ea: Cleaning Foam Swabs
• 1 ea: Stand/Discharge Cup
• Instruction Sheet

DISCLAIMER:  InkJetPrintables service kits are intended for use by trained, authorized or certified technicians.  Although brief instructions are included, we can not freely supply end-users with specific technical support in the use of these kits.  We can not be responsible to troubleshoot a user's machine to determine the reason for print quality issues.  Although we will always try our best to accommodate our customers with support and technical knowledge, please understand we can not offer this free support "on demand".  Your best option is to access Brother's technical support team and when necessary, have a certified technician for on-site service.

WARNING:  Print head nozzles are very delicate and sensitive, if any substance other than a specifically formulated solvent is used to clean them, damage to the nozzles and print head is likely to occur.  Many operators are misinformed that they can use 'Simple Green" to clean sensitive and delicate inkjet printheads.  "Simple Green" is intended for janitorial and general cleaning purposes and is NOT FILTERED and may contain particulate that will damage or permanently clog printhead nozzles.  We recommend to USE ONLY our *Triple Filtered* Inkjet Cleaning Solution "Juice".  It is specialy formulated by us and triple-filtered to guarantee NO FOREIGN specs or contaminates that can damage printheads.