IJP Brother GT Series Drain Tube Flush Kit

Were you told that your Drain Tube #SA6004001 is clogged?

Suggested Use:     Use this kit for clearing clogged drain tubes in the Brother® GT-541 or GT-782 direct to garment inkjet printers.  There is enough solution to clear/flush all 4 drain tubes.  Drain tubes become impacted at the solenoid pinch spot deep inside the Maintenance Station with dried ink residue and lint or dust that is flushed past Caps.  Once this blockage occurs, you are unable to replenish ink into printhead to clear head clogs.     

Machines that are subject to long periods of storage, infrequent use, temperature extremes or high dust/lint garment handling, will at some point suffer from partial, or total blockage of drain tubes.  We have also seen this blockage in frequently used printers that are 3-5 years old.

CONTENTS: 
- 1 bottle  236cc Triple Filtered Wash "Juice" 
- 5 each  Foam Cleaning Swabs 
- 1 each  X-tra Large 60cc Syringe with Luer Lock Tip 
- 1 each  Squirt Cap with Dispenser Tube 
- 1 each  Silicone "Tight Fit" Injection Tube
- 1 pair  Nitrile Chemical Resistant Gloves

WARNING:  Print head nozzles are very delicate and sensitive, if any substance other than a specifically formulated solvent is used to clean them, damage to the nozzles and print head is likely to occur.  Many operators are misinformed that they can use 'Simple Green" to clean sensitive and delicate inkjet printheads.  "Simple Green" is intended for janitorial and general cleaning purposes and is NOT FILTERED and may contain particulate that will damage or permanently clog printhead nozzles.  We recommend to USE ONLY our *Triple Filtered* Inkjet Cleaning Solution "Juice".  It is specialy formulated by us and triple-filtered to guarantee NO FOREIGN specs or contaminates that can damage printheads.